AC
Leakage Current Clamp Meters & AC Leakage Current
Test Meters
Clamp Meters That
Are Designed For Non-Invasive Checks of Insulation
Condition to Isolate and Identify Sources of Current
Leakage
Basics of AC Current Leakage (PDF)
|
Most Orders over $25 ship
FREE
with Super Saver Shipping
|
|
AC Leakage Current Clamp
Meters |
|
|
 AC
Leakage Current Clamp Meter - Fluke 360
Rugged and Accurate AC
Leakage Current Clamp Meter
Measurement of leakage current with 3 mA
range and 1 μA of resolution, for accurate
monitoring of insulation erosion. Broad
range of measurement, from 1 μA up to 60 A,
for all installation needs. Advanced
shielding to ensure accurate results when
measuring near other conductors. The high
durability clamp construction can withstand
over 50,000 operations. Easy-to-carry,
pocket-sized clamp with wide 40 mm (1.5 in)
jaw size. Handy “Display-Hold” button for
capturing readings in hard to-reach places. |
|
|
 AC
Leakage Current Clamp Meter - Extech 380943
Measures AC Current to
60A plus AC Voltage and Resistance
Measure AC Current to 60A plus AC
Voltage and Resistance. 40mA range resolves
leakage current to 10µA. 1% basic AC Current
accuracy. 1.2" (30mm) Jaw size handles
multiple connections and ground rods.
Shielded transformer jaw minimizes the
effect of stray magnetic fields. Large 4000
count LCD provides high 10µA resolution with
fast bargraph (20/sec). Selectable 50/60Hz
filter circuit to eliminate high frequency
noise and harmonics. Wide frequency response
40Hz-1kHz. |
|
|
50A
Harmonics / AC Leakage Clamp Meter - Extech 382035
50 Amp Current and Voltage Harmonic Analysis
High current resolution to 10µA. Voltage and
Current Harmonic Analysis in percentage (%)
and magnitude. Switchable 50/60Hz
fundamental frequency. Fast peak function
(39µs for 50Hz, 33µs for 60Hz). Total
Harmonic Distortion (%THD-F) and Crest
Factor (CF). Programmable CT ratio (1 to
250)
Jaw size 1.2" (30mm). Max/Min and Data Hold.
Auto power off saves battery life. Complete
with test leads, 2 AA batteries, and
carrying case. |
|
|
100A
Harmonics / AC Leakage Clamp Meter - Extech 382045
100 Amp Current and Voltage Harmonic
Analysis
High current resolution to 10µA. Voltage and
Current Harmonic Analysis in percentage (%)
and magnitude. Switchable 50/60Hz
fundamental frequency. Fast peak function
(39µs for 50Hz, 33µs for 60Hz). Total
Harmonic Distortion (%THD-F) and Crest
Factor (CF). Programmable CT ratio (1 to
250). Jaw size 1.2" (30mm). Max/Min and Data
Hold. Auto power off saves battery life.
Complete with test leads, 2 AA batteries,
and carrying case. Shielded jaw for high
immunity to external interference. Active
(W, kW,HP), reactive (VAR, kVAR), and
apparent (VA, kVA) power. Power factor (PF),
phase angle (f), and energy (mWH, WH, kWH).
3-phase sequence measurement. |
|
AC Leakage Current Testers |
|
|
AC Leakage
Current Tester - Simpson Model 229-2
Detects AC Current
Leakage and Approximates Human Threshold of
Perception
Testing for dangerous small
leakage currents is easy with the Simpson
Model 229-2 Leakage Current Tester. For use
in appliance field service, in the lab, or
in production, the 229-2 approximates the
human threshold of perception in detecting
hazardous AC leakage current. The 229-2
comes with test leads with alligator clips,
manual and batteries. Checks both 120VAC and
240VAC appliances, motors and other
equipment Conforms to ANSI C101.1-1986 and
UL safety standards Overload protected up to
500V peak momentarily on all ranges
Compensated to approximate Dalziel's
threshold of perception curve |
|
|
AC/DC Leakage
Current Tester - Simpson Model 228
Detects AC & DC
Leakage Current and Simulates Human Response
at 3 Levels
Test for dangerous leakage current with
the Simpson Model 228, designed to meet the
latest UL, IEC, and ANSI specifications. The
228 detects both AC and DC leakage current
and simulates human response at three
different levels -- reaction, let-go, and
burn hazard. Each Model 228 comes with test
leads with alligator clips, manual, and
batteries. Detects dangerous AC & DC leakage
current present on the conductive surfaces
of electrical or electronic equipment
Designed to meet new IEC, ANSI, and UL
guidelines Reaction, Let-Go and Unweighted
Burn Hazard network measurements
Battery-powered for maximum portability . |
| |
|
|
|
|
MUST-Have
Accessory
For Clamp Meters
Misc.
|
Line Separator for 3 Prong Plug - Extech 480172
|
|
|
Order online: Add your item to your shopping cart and
submit your order online for fast delivery.
