Carbon Monoxide (CO) and Carbon Dioxide (CO2)
Detectors and Meters
Instruments that Detect, Measure and Monitor CO
(Carbon Monoxide) and CO2 (Carbon Dioxide)
Concentrations
|
Most Orders over $25 ship
FREE
with Super Saver Shipping
|
|
Carbon Monoxide
(CO) Meters |
|
|
 Carbon
Monoxide (CO) Meter - Extech CO10
Performs Air Safety Checks for Carbon
Monoxide From 0 to 1,000 ppm
Ergonomic pocket size housing. One button operation.
Easy to read 1999 count backlit displays CO levels from 0 to
1000ppm. Audible alarm with increasing intensity above
200ppm. Backlight for low light conditions. Max Hold and
Data hold buttons. Auto Power off. |
|
|
 Carbon
Monoxide (CO) Meter - Fluke CO-220
Performs Air Safety Checks for Carbon
Monoxide From 0 to 1,000 ppm
Large LCD displays CO levels from 0 to 1000 ppm. Beeper
triggers with increasing frequency as CO levels rise. MAX
Hold function stores and displays the maximum CO level.
Replaceable sensor extends tool life Makes it easy to take
quick and accurate measurements of CO levels. Featuring the
newest generation of electrochemical sensors, the CO-220
responds very quickly to ambient changes in carbon monoxide
concentration without the use of a pump. The CO-220 is the
perfect instrument for technicians and other professionals
who need to measure CO levels where accumulation of
combustion gas is possible. . |
|
|
 Carbon
Monoxide (CO) Analyzer - TIF 8500A
Professional Quality CO Meter measures
1 to 10,000 ppm with 1ppm resolution
Professional grade service tool for accurate
measurements of Carbon Monoxide (CO) levels in any
environment or application, including ambient, appliance
surroundings and furnace flues. The TIF8500A has an industry
first, "Voice" feature which allows the unit to actually
speak out the measured reading. Measures level of Carbon
Monoxide (CO). Perfect for checking dangerous levels of CO
in manholes or other areas before a electrician enters them.
Can be used in any environment where level of CO needs to be
measured. Voice feature for audible read out. Field
replaceable electrochemical sensor. Rapid warm up.
Headphones included for high noise areas or for privacy.
Cordless and portable. Ranges from 1 - 10,000 ppm with
resolution of 1 ppm. Basic accuracy: ±5% of reading. |
|
Carbon Dioxide
(CO2) Meters |
|
|
Indoor
Air Quality Meter / Datalogger - Extech EA80
Measures CO2, Humidity, Temperature,
Dew Point and Wet Bulb
Checks for Carbon Dioxide (CO2) concentrations.
Maintenance free dual wavelength NDIR (non-dispersive
infrared) CO2 sensor. Measurement ranges: CO2: 0 to 6,000
ppm; Temperature: -4 to 140°F (-20 to 60°C); Humidity: 10 to
95%RH. Continuous (20,000 sets) or manual (99 sets)
datalogging. Data hold, Max/Min with Time stamp, and Alarm.
Auto Power Off. Easy calibration in fresh air. |
|
|
Combustible
Gas Detector - TIF8800
Detects CO2 from 500ppm & Combustible
Gas as low as 5ppm Depending on Gas
Warns against dangerous explosive gas. Checks for
explosive gas in places where electrical measurement has to
be taken. Applications include: manholes, gas lines, fuel
systems, exhausts, propane stations, IAQ tests and arson
residue. Used in almost any situation where combustible
gasses, vapor or residues need to be found. Ultimate
sensitivity 5 – 50 ppm depending on gas. Instantaneous
response. Automatic warm up. Adjustable sensitivity. Audible
"Geiger counter" type signal. UL, CE and MSHA approved . |
|
|
Combustible
Gas Detector with Sensitivity Lights - TIF8800A
Detects CO2 from 500ppm & Combustible
Gas as low as 5ppm Depending on Gas
6 Built-In LED Leak Sensitivity Lights. Warns against
dangerous explosive gas. Checks for explosive gas in places
where electrical measurement has to be taken. Applications
include: manholes, gas lines, fuel systems, exhausts,
propane stations, IAQ tests and arson residue. Used in
almost any situation where combustible gasses, vapor or
residues need to be found. Ultimate sensitivity 5 – 50 ppm
depending on gas. Instantaneous response. Automatic warm up.
Adjustable sensitivity. Audible "Geiger counter" type
signal. UL, CE and MSHA approved . |
|
|
Combustible
Gas Detector with Sensitivity Lights & Alarm Mute - TIF8850
Detects CO2 from 500ppm & Combustible
Gas as low as 5ppm Depending on Gas
Auto Mute Button for Alarm. 6 Built-In LED Leak
Sensitivity Lights. Warns against dangerous explosive gas.
Checks for explosive gas in places where electrical
measurement has to be taken. Applications include: manholes,
gas lines, fuel systems, exhausts, propane stations, IAQ
tests and arson residue. Used in almost any situation where
combustible gasses, vapor or residues need to be found.
Ultimate sensitivity 5 – 50 ppm depending on gas.
Instantaneous response. Automatic warm up. Adjustable
sensitivity. Audible "Geiger counter" type signal. UL, CE
and MSHA approved . |
|
|
|
|
|
|
Carbon Monoxide a
Clear & Present Danger |
Order online: Add your item to your shopping cart and
submit your order online for fast delivery.
