TriScanner OneStep - Electronic Stud & Metal Finder
with CenterVision, Stud Scan Mode, Metal Scan Mode, DeepScan Mode and AC WireWarning

TriScanner OneStep

Finds the center of studs in one pass!

Revolutionary CenterVision™ technology pinpoints the stud center, not just the edge.

TriScanner® OneStep™ is a four-function scanner with the patented SpotLite® Pointing System and rubberized grip.

TriScanner® OneStep™ finds the center and edges of studs and joists, finds copper (and other non-ferrous metal) pipes up to 1-1/2 inches (38 mm) deep, and finds rebar (ferrous metal) in concrete up to 3 inches (76 mm) deep, while continuously detecting hot unshielded AC wires.

Stud Scan Mode
TriScanner® OneStep™ finds the edges of studs and joists up to 3/4 inches (19 mm) deep in normal mode.

Stud DeepScan® Mode
In Zircon's patented DeepScan® mode, TriScanner OneStep™ can find studs up to 1-1/2 inches (38 mm) deep behind drywall, paneling, or plywood.

Metal Scan Mode
Finds copper and other non-ferrous metal up to 1-1/2 inches (38 mm) deep.
Finds ferrous metal such as rebar in concrete up to 3 inches (76 mm) deep.

AC WireWarning™
Continuously detects hot unshielded AC wiring—an important safety feature.

TriScanner OneStep Electronic stud finder with SpotLite makes finding studs easy Key Features

Exclusive—finds the stud center
Finds both wood and metal studs
Constant hot AC WireWarning™ in all modes for safety
Patented SpotLite® Pointing System
Patented DeepScan® dual sensitivity scanning
Metal scan for finding pipes, nails, rebar, and other hidden metals

Applications

Find the center and edges of wood or metal studs or joists to:

Hang cabinets, pictures, mirrors, and shelves securely
Install ceiling fans, grab bars, and chandeliers
Find metal pipes behind tile and in concrete
Find conduit, rebar, electrical boxes, exhaust vents, and ducting
Detect hot electricity behind walls, floors, and ceilings
Avoid cutting or drilling into piping or electrical lines

The ZIRCON Advantage

Patent-pending CenterVision™ technology finds the stud center in one step.
Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings.
Exclusive, patented SpotLite Pointing System shines a bright beam of light over target center.
Metal-only setting looks specifically for metal pipes or rebar.
AC WireWarning™ is active in all modes for safety.
Patented dual-sensitivity scanning—normal up to 3/4 inch (19 mm) or DeepScan up to 1-1/2 inches (38 mm) — through drywall, paneling or plywood, or a combination of them, and through most bare wood flooring.

Technical Information

Dimensions	6.32 in. H x 3.13 in. W x 1.27 in. D (161 mm x 80 mm x 32 mm)
Weight	6.5 oz. (184 g) without battery
Battery type	9-V alkaline (not included)
Estimated battery life	2 years at 10 minutes per day with alkaline battery
Position accuracy	Stud Scan mode: typically within 1/8 in. using the dual scan and mark procedure DeepScan mode: typically within 3/16 in. using the same procedure Metal Scan mode: typically within 1/2 in. (13 mm)
Detection Depth	Up to 3/4 in. in Stud Scan mode Up to 1-1/2 in. in DeepScan mode Up to 1-1/2 in. for copper in Metal Scan mode Up to 3 in. for rebar in Metal Scan mode NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
AC Position Accuracy	Typically 90–250 V at 50–60 Hz laterally within 12 in. (150 mm) of a hot unshielded wire
AC Sensing Depth	Typical depth of 2 in. (50 mm)
Operating temperature	20° to 120°F (-7° to 49°C)
Storage temperature	-20° to 150°F (-29° to 66°C)
Humidity	80% RH (noncondensing)
Water resistance	Splash and water resistant, not waterproof

Zircon TriScanner OneStep

Zircon TriScanner OneStep
Electronic Stud and Joist Finder with CenterVision and AC WireWarning

Most Orders over $25 ship FREE with Super Saver Shipping


Order online: Add your item to your shopping cart and submit your order online for fast delivery.
EMail Us: Orders@Contractor-Books.com
	Contractor-Books.com Home Page